24
Isssue 2
Doc. No. 002 Issue 2 April 1998
Doors
Program the information to apply for each door.
1 Display the main menu and choose DOORS (3). The follo-
wing text is displayed:
1) EDIT
2) PRINT
2 Choose EDIT (1). The following text is displayed:
WHICH DOOR?
(1-6)
3 Enter the door to program the information for, e.g. 1 for the
first door. The following text is displayed:
OPENING TIME?
(1-999) (7)
4 Enter the desired lock activating time or keep the preset time
(7 seconds).
5 Press . The following text is displayed:
TIME ZONE F. DAY OPEN?
(0=DISABLED) (0)
6 Enter the number of the time zone when the door should be
unlocked. If the door should be unlocked 24 hours, keep the
preset setting (0).
7 Press . The following text is displayed:
TIME ZONE FOR OPEN BUTTON
(0=ALWAYS) (0)
8 Enter the number of the time zone when the push button on
the inside should work. If the button should always work, keep
the preset setting (0).
4. PROGRAMMING
New entry
To Next Page
Loading...