32
Isssue 2
Doc. No. 002 Issue 2 April 1998
Open the door by repeating number (on/off)
This function can switch off the setting allowing the visitor to
open to door by repeating the telephone number when the
telephone in the apartment is busy. This is the default setting
.
Proceed as follows:
1 Go to the Options menu and browse to the Open on busy tone
function (follow the initial instructions in the Change call
duration time section on page 27). The following text is displayed:
/ TO SCROLL
OPEN ON 2nd BUSY TONE
2 Press . The following text is displayed:
ENTER 1 (ON) / 0 (OFF)
(1)
3 Press 0 (means that the door cannot be opened by repeating
the number just entered).
4 Press . The following text is displayed:
/ TO SCROLL
OPEN ON 2nd BUSY TONE
5 Press
Esc
to go back to stand-by position or browse to another
function and continue programming.
4. PROGRAMMING
To Next Page
Loading...