27
Doc. No. 002 Issue 2 April 1998
Change call duration time
Use this function to set the number of seconds a conversation
between the entrance phone and the telephone in the
apartment is allowed to last. When the system is delivered, the
call duration time is set to 45 seconds. If no change is required
at this time, skip the instructions below.
To change the call duration time, proceed as follows:
1 Press
Esc
three times when the central unit display is in stand-
by position. The following text is displayed:
OPTIONS MENU
2 Press . The following text is displayed:
/ TO SCROLL
3 Press . The following text is displayed:
/ TO SCROLL
CHANGE PASSWORD
4 Press . The following text is displayed:
/ TO SCROLL
CHANGE TALK TIME
5 Press . The following text is displayed:
ENTER TIME (1–999 sec)
(45)
6 Enter the desired call duration time and press . The
following text is displayed again:
/ TO SCROLL
CHANGE TALK TIME
4. PROGRAMMING
To Next Page
Loading...