30
Isssue 2
Doc. No. 002 Issue 2 April 1998
Answer Choice
The Answer Choice function is used to determine the way
Telecode interacts with the exchange. There are 2 options
available for UK operation. (Option 0 must not be used in
UK)
If the option is set to 1, the users will hear the electronic tune
when answering calls and will have to press 5 to talk
If the option is set to 2, the user will be connected to the door
immediately. Note:- Talk time starts from the end of dialling.
To set the Answering Choice function:
1 Go to the Options menu and scroll to the Answering Choice
function (follow the initial instructions in the Change call
duration time section on page 27). The following text is dis-
played:
/ TO SCROLL
ANSWER CHOICE
2 Press . The following text is displayed:
ENTER 1 (ON) / 0 (OFF)
(0)
3 Press 1 or 2.
4 Press . The following text is displayed again:
/ TO SCROLL
ANSWER CHOICE
5 Press
Esc
to go back to stand-by position or scroll to another
function and continue programming.
To change the function, follow the above instructions,
entering the new value.
4. PROGRAMMING
To Next Page
Loading...