Beyerdynamic TG 500 - Page 18

TG 500 – Diversity receiver
18
• Display system info
In the “System info” menu, you can display information about
the receiver and the system.
Press the enter button  to open the submenu.
By repeatedly pressing the up  or down button , you can
scroll through the submenu and display the information listed
below.
Display receiver/system hardware version
Display receiver/system hardware type
Display region band (for frequency ranges see chapter 10
“Technical specifications”)
Display current software or firmware version
To exit the “System info” submenu, press the “Exit” button .
Figure 2-58: Selecting the “System info” submenu
system
info
Figure 2-59: Displaying hardware version
hardware
ver 1
Figure 2-60: Displaying hardware type
hardware
single
Figure 2-61: Displaying region and band
region
band 3
Figure 2-62: Displaying software or firmware version
software
rev 1.0