Beyerdynamic TG 500 - Care Instructions

TG 500 – Handheld transmitter
22
3.5 Care instructions
• Protect the handheld transmitter from moisture, falling and
impacts.
• Use a soft cloth moistened with spirit or alcohol to clean
metallic surfaces.
• Once you start noticing sound changes, you should clean the
integrated pop shield:
– To do this, unscrew the microphone head grille anti-
clockwise.
– Remove the foam pop shield with a pair of tweezers if
necessary and rinse it under clear water.
– If required, you can also use a mild washing-up liquid.
– Blow-dry the pop shield or leave it to dry overnight.
– Clean the microphone head grille from the inside and outside
with a slightly damp cloth or in clear water with a soft brush
and leave it to dry overnight.
– The microphone head grille is not to be cleaned in a
dishwasher.
– Place the dry pop shield back in the microphone head grille;
screw the grille back in place in a clockwise direction.
Figure 3-23: Unscrewing the microphone head grille
Figure 3-24: Removing the foam pop shield
Figure 3-25: Cleaning the foam pop shield