Beyonwiz DP-P2 - Remote Control Operation

Introduction
6
4. Remote Control
4-1. Operating DP-P2
In order to operate the DP-P2 with the enclosed remote control, please
select
STB mode by pressing the STB button. The red backlight
beneath the
STB button lights when you press a button in this mode.
The below picture and right table show the function of each button on
the remote control.
1
STANDBY Switch the DP-P2
between Operation and Standby mode.
2 AV bypass
Change the Composite, S-Video and Analog Audio outputs
to
the AV bypass mode
3
STB
Set Remote Control to Work for the DP-P2.
4
T
V/RADIO Change to TV mode or Radio mode.
5
T
V-OUT Change Video Output. (Refer to page 17. for more information)
6
T
V
Control standard TVs with remote control.
7
SETUP Go to SETUP Menu.
8
WizTV Go to Internet Service. (for future use)
9
LIVE
Go to Live TV.
10
File
PLAY Go to File Play.
11
VOL +/- Adjust the volume. (Increase/Decrease)
12
CH +/- Change TV or Radio Service.
13
MUTE
Enable or disable the Audio output.
14
INFO
Show service information.
15
FAV
Show Favorite Service List.
16
GUIDE Show EPG (Electronic Program Guide).
17
POP-UP Show advanced menus
of the current mode.
18
LIST
Show Service List.
19
EXIT
Return to the previous menu or Cancel.
20
UP/DOWN/LEFT/
RIGHT
Move the indicator on the menu mode.
21
OK
Select an item on the menu or Confirm.
22
RECALL Recall the previously viewed (or listened) service.
23
RED
Optional function key
24
GREEN Optional function key
25
YELLOW Optional function key
26
BLUE
Optional function key
27
0~9
Numeric buttons.
28
SLEEP Set sleep time of the DP-P2.
29
ZOOM Zoom-in or Zoom-out.
30
PLAY
Play Content.
31
STOP
Stop playback.
32
PAUSE Pause playback.
33
SLOW FWD Slow Forward.
34
REW
Rewind.
35
FF
Fast Forward.
36
PREV
Go to the previous track or file, and continue playing.
37
NEXT
Go to the next track or file, and continue playing.
38
REC
Start recording.
39
SUBTITLE Change Subtitle language.
40
T
ELETEXT Show Teletext.
41
SOUNDTRACK Change Soundtrack language.