Introduction
7
4-2.
Operating Other Beyonwiz Products
The enclosed remote control (Product code: BR-02) is designed to
operate the DP-P2 only. To operate other Beyonwiz products of DP-S1,
DP-P1 and DP-H1, which are designed to be operated with a remote
control of BR-01, you have to change its operating mode; please press
and hold the numeric button
1
for 5~6 seconds while pressing the
OK
button. The red backlight beneath the
TV
button blinks three-times if
the remote control changes its operating mode successfully.
If you want to return the operating mode of the remote control to
operate the DP-P2, please press and hold the numeric button
2
for 5~6
seconds while pressing the
OK
button. The red backlight beneath the
TV
button blinks three-times if the remote control changes its operating
mode successfully.
To Next Page
Loading...