Safety
2-4
2.4 Safety devices
2.4.1 Fundamental aspects
Check the safety equipment and locking devices on the
device for safe operational condition.
Only operate the device if all safety devices are present
and enabled. The operating company or operator of the
flame scanner is responsible for the proper operation of
the device.
The device has been fitted with warning and danger signs
for the protection of operating staff. These signs have to
be observed. Damaged or illegible signs have to be re-
placed immediately.
2.4.2 Safety devices on the flame scanner
The flame scanner has been fitted with the following
safety devices:
• Housing (protection against accidental contact)
• Flame-proof housing (optional)
• Earth connection of device (optional)
• Explosion protection barriers (optional)
To Next Page
Loading...
Need help?
General
