Content
iii
1
General aspects 1-1
1.1
Introduction 1-1
1.2
Warning notes 1-2
1.3
Copyright protection 1-3
1.4
Disposal information 1-3
1.5
Warranty 1-4
1.6
Obligation of the operating company 1-5
1.7
Liability disclaimer 1-6
1.8
Declaration of conformity 1-7
1.9
Address of the manufacturer 1-8
2
Safety 2-1
2.1
Intended use 2-1
2.2
Requirements on persons 2-2
2.3
Safety instructions 2-3
2.4
Safety devices 2-4
2.4.1
Fundamental aspects 2-4
2.4.2
Safety devices on the flame scanner 2-4
2.5
Safety instructions in case of maintenance and troubleshooting 2-5
2.5.1
Fundamental aspects 2-5
2.5.2
Electrical / electronic devices 2-6
2.5.3
Testing in keeping with the German Workplace Safety Ordinance (BetrSichV) 2-7
2.5.4
Safety test 2-7
3
Technical data 3-1
3.1
General characteristic features 3-1
3.2
Electrical system, optical system, mechanical system 3-1
3.3
Weight 3-2
3.4
Dimensions 3-2
3.5
Adjustment controls 3-3
3.5.1
Sensitivity potentiometer 3-3
3.5.2
Optical aperture 3-4
3.6
Device design - block diagram of the flame scanner 3-5
4
Transport, installation and connection 4-1
4.1
Scope of delivery 4-1
4.2
Packaging 4-2
4.3
Forwarding instructions 4-2
4.4
Weight - flame scanner 4-2
4.5
Space requirement 4-2
4.6
Installation 4-3
4.6.1
Company adjustment of the flame scanner 4-6
4.6.2
Adapting the flame scanner to the fuel 4-7
4.7
Connection 4-8
4.7.1
Electrical connection 4-8
4.7.2
Laying the special cable KW5 4-9
4.7.1
Handling of the KW5-Shieldings 4-10
4.8
Storage 4-10
To Next Page
Loading...