- 30 -
Control unit
EN
C
A B
Default setting
Pulling this switches
for reduces the
leakage current
12. TROUBLESHOOTING GUIDE
- In the case of a malfunction, check that the correct barrier was selected (paragraph 5)
- Dual ashing of the cover lights. Indicates that scheduled maintenance is required. Check the parameters -2ND level,
-2ND level, -2ND level.
- Current from to ground leakage problem: the Inverter have a built-in high-attenuation noise lter and are grounded via a capacitor.
A switch makes to reduce leakage current from to ground. The reducing the load means though non-conformity with the EMC
standard on the inverter itself. Do switching with the power o .
ENGLISH
To Next Page
Loading...
