To Next PageTo Next Page
Need help?Do you have a question about the BGS GENERAL PBO and is the answer not in the manual?
Introduces the PBO/PBOM vacuum pumps and their operating principles.
Explains the components and construction variations across different models.
Provides instructions for safely lifting and moving the vacuum pumps.
Guides on selecting the correct location and ensuring proper installation.
Details the procedure for connecting the pump's electrical components.
Identifies potential hazards associated with moving mechanical parts.
Highlights dangers related to electrical connections and operation.
Warns about hazards from high operating temperatures.
Covers proper oil disposal and noise level considerations.
Steps to perform before initial pump operation, including oil filling.
Daily and routine checks for oil level, condition, and filter cleaning.
Scheduled replacements of oil, filters, and wear parts based on operating hours.
Lists common problems and their recommended solutions.
Describes the purpose and types of inlet filters (cartridge and oil bath).
Instructions for identifying and ordering replacement parts.
Detailed list and diagram of spare parts specific to the 3 PBO-M model.
Detailed list and diagram of spare parts for 6 PBO-M and 12 PBO-M models.
Detailed list and diagram of spare parts specific to the 28 PBO-M model.
Detailed list and diagram of spare parts for 40 PBO-M and 60 PBO-M models.
Detailed list and diagram of spare parts specific to the 100 PBO-M model.
Detailed list and diagram of spare parts for 220 PBO-M and 340 PBO-M models.
Table listing recommended oils for different pump models.
Provides detailed measurements and diagrams for various pump models.
Illustrates connection methods for single-phase and three-phase motors.
Lists common problems and their recommended solutions.
General| Power Source | Electric |
|---|---|
| Frequency | 50Hz |
| Power | 0.5 HP |
| Inlet/Outlet Size | 1 inch |
| Voltage | 220V |
| Phase | Single Phase |
