Shaoxing Bibo Automatic Equipment Co., Ltd.
Tel:+86 575 88918283 Mobile:+86 133 25759139
Url: www.ourbibo.com E-Mail: bibo@ourbibo.com
2. What's in the box?
The printer may be re-taped during inspection at the customs.
There is troubleshooting files in the SD card which can also help you.
The frame of BIBO 3D printer is CNC machined, and we cleaned the printer
before delivery. But during violent transportation vibration, there maybe some
machining powder of the aluminum composite panel come out from the frame
junctions or some dust from the cartons. Sorry for this trouble. Please blow the
dust away.
Along with your BIBO 3D printer, this package contains the following which are
in the small carton above the build platform, there are(the words and pictures are
lined in the same order ):
1 roll PLA filament, 1 or 2 filament holders, some allen wrenches (packed with
black clamps), some bolts and nuts, 1 glue stick, 1 power cord, 1 USB A to B
cable, 1 or 2 filament guide tubes (may already fixed on the filament tube couplers
support), 1 filament tube couplers support, 2 extruder wire clamps, 1 spare
thermistor, acrylic cover bolts and nuts, 1 cross screwdriver, 1 SD card(not inside
this small box, but above it ).
Please remove all the files we sent to you in SD card to your computer, or
SD card printing may not run. When you want to print something, please
copy the gcode files to SD card.
Red acrylic cover panels and clear door may have paper or film protected.
If you need to transport the printer to other place, please
keep all the packing carton and material, and take the photos
step by step when you do unboxing. In this way, you can
pack the printer the same as us, and the transportation of
the printer will be safe.
The packing manual is here:
https://drive.google.com/file/d/1-CAvBgYopazYT4lmRduwQr
P8KD-b0Q7L/view?usp=sharing
To Next Page
Loading...