Shaoxing Bibo Automatic Equipment Co., Ltd.
Tel:+86 575 88918283 Mobile:+86 133 25759139
Url: www.ourbibo.com E-Mail:
bibo@ourbibo.com
11. WIFI (optional function)
The BIBO printer has the optional function WIFI in AP mode or Client (STA)
mode. Client mode is easier. The WIFI module can work on normal 2G wifi in
client mode, and 5G WIFI can’t be connected. You can use AP mode instead.
AP mode Client (STA) mode
Power on the printer, and go to the settings menu on the touch screen, then
click wifi, and you will see the wifi name, password, and IP address in AP
mode on the touch screen when the wifi status is connected.
Let your computer to connect the printer’s wifi. For example the wifi information
is the photo above, we should search the wifi named bibo, and then we can
connect the printer’s wifi on the computer.
Type the IP address showed on the touch screen to the computer’s brower.
For example the wifi information is the photo above, we should type
192.168.4.1, and the brower will show as below: (STA means client mode)
To Next Page
Loading...