Shaoxing Bibo Automatic Equipment Co., Ltd.
Tel:+86 575 88918283 Mobile:+86 133 25759139
Url: www.ourbibo.com E-Mail:
bibo@ourbibo.com
8. Acrylic Cover Installation
Acrylic cover is necessary for printing ABS, PC, Nylon…
We also have finished acrylic cover assembly video, and you can copy it
from the SD card. Acrylic panels usually are red, and some are transparent,
and may be packed with brown protective paper. Acrylic clear door may
be packed with white protective film.
The assemble order is back side, left side, right side, top side and front
side in the end. Please screw bolts not tight first, after installed all five
panels , you can finally tighten the bolts, but still carefully not too tight
(acrylic panel is very fragile). Assemble the acrylic cover as the photo below.
Nuts can be installed first
Insert left panel to back panel
To Next Page
Loading...