To Next PageTo Next Page
Need help?Do you have a question about the Bibo 2 TOUCH and is the answer not in the manual?
Essential safety warnings for operating and maintaining the 3D printer, including handling hot parts and electricity.
Detailed instructions for assembling the printer components after unboxing, covering initial setup steps.
Guide on leveling the bed, homing axes, and completing the initial print test for successful operation.
Key advice for successful printing, including filament handling, bed adhesion, and printer operation.
Steps to install and set up the Repetier-Host software for printer control and slicing.
Guide to installing and configuring the Cura slicing software with printer-specific profiles.
Instructions for slicing models for single extruder prints using Cura settings and profiles.
Guidance on slicing for dual extrusion, including object assignment and specific configuration.
Instructions on how to assemble and attach the acrylic protective cover to the printer.
How to perform copy printing for simultaneous printing of identical objects for time efficiency.
Features like resuming prints after power loss and filament run-out detection for enhanced operation.
Steps for connecting the printer via USB and installing necessary drivers for computer communication.
Configuring the printer's WIFI in AP or Client mode and connecting to a network.
Using software like Printrun, MKS Host, and Cura for WIFI printing and file transfer.
Routine maintenance tasks and cleaning procedures for optimal printer performance and longevity.
General| Print Speed | up to 150 mm/s |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Filament Compatibility | PLA, ABS, PETG, TPU |
| Connectivity | USB, SD Card |
| Frame Material | Aluminum |
| Number of Extruders | 1 |
| Filament Diameter | 1.75 mm |
| Layer Resolution | 0.05-0.3 mm |
| Display | 3.5-inch touchscreen |
| Print Technology | FDM (Fused Deposition Modeling) |
