Shaoxing Bibo Automatic Equipment Co., Ltd.
Tel:+86 575 88918283 Mobile:+86 133 25759139
Url: www.ourbibo.com E-Mail:
bibo@ourbibo.com
10. USB Driver Installation (not necessary)
Please make sure the plug socket in your room are well grounded, so the
printer and the computer are both well grounded too. Please also make
sure the USB port on the computer is ok and stable. If not, the USB port
on the printer and computer and USB cable will be burnt. We recommend
to power off the printer first, then plug the USB cable.
If you want to print by connecting the computer with USB cable (not
recommended, printing from SD card is more stable especially for long time
printing), you have to install the driver on the computer for the printer,
and choose correct com port and baudrate (250000 or 115200) in the
slicing software.
When you connect the printer to the computer by usb cable, please disable
WiFi function first (click Settings-WiFi-Disable on the touch screen) , and
let the touch screen stays on the main screen after the printer is powered
on, and the communication for USB port will be ok.
Please note that USB connection is not stable as SD card directly
printing. The longer the usb cable is, the worse connection quality. It
also needs stable USB port of the computer and the computer should be
always on and no crash or sleep during printing. That's why we
recommend the customer not to use USB printing in our operation
manual.
1. Power on the printer and disable WiFi function first (click
Settings-WiFi-Disable on the touch screen)
2. Plug the USB cable into the computer
3. Your operating system should find the correct drivers automatically, or
download them automatically with Windows update.
If the drivers are not found automatically, then copy the driver from the SD
card sent to you or download drivers from here:
http://wch.cn/download/CH341SER_EXE.html (for windows)
http://wch.cn/download/CH341SER_LINUX_ZIP.html (for Linux)
http://wch.cn/download/CH341SER_MAC_ZIP.html (for Mac)
Then install it.
4.For Mac system, if the system is over OSX 10.8, please lower the
security level of the system, allowed to install app from anywhere
before installation, or the driver can't be installed. Please check the
photo as below:
To Next Page
Loading...