Shaoxing Bibo Automatic Equipment Co., Ltd.
Tel:+86 575 88918283 Mobile:+86 133 25759139
Url: www.ourbibo.com E-Mail: bibo@ourbibo.com
Goto the Slicer tab and select at least the following:
Print Configuration: BIBO dual extruder repetier cura printing settings
Then press the Slice button. The result should look something like this:
The left is a square used for purging when switching from one extruder to the
other.
When you use the second way to assign the extruder by moving coordinate, you
click slice, there will be window below:
You choose now will be ok.
To Next Page
Loading...