BIGREP ONE - Page 51

BigRep ONE 1 Introduction
51
› Non-compliance with this manual
› Use of unauthorized spare parts
› Unauthorized modifications of the printer
› Incorrectly configured, faulty or unsuitable slicing soware
Manual / Version
2018/03/01
Specifications
Manufacturer BigRep GmbH Model BigRep ONE
Berlin / Germany Version ONE.3C | 06/2017
Dimensions (mm) x 1850 y 2250 z 1725 Weight Printer ca. 460 kg
Layer Resolution
1mm / 0,5mm nozzle
400 – 900 µm /
150 – 400 µm
Extruder Two modular
extrusion heads
Printing Technology FFF 3D Printing Print Surface Heated Bed
Build Volume (mm) x 1005 y 1005 z 1005 Heating Strategy Heated Surface
Positioning
Precision (X:Y)
100 µm Print Bed Tem-
perature
60–80°C
Positioning
Precision (Z)
< 20 µm Extruder
Temperature
Max. 250 °C
Max. Feed 500 mm/s AC Input 208V-240V, 16A,
50/60Hz
Printing Materials
(Other filaments on
request)
BigRep PLA
BigRep PRO HT
BigRep PRO HS
BigRep PETG
Support Material BigRep PVA
Ambient Operating
Temperature
+15° C - +35° C Filament
Diameter
2,75 mm - 3 mm
Nozzle Diameter 1 mm NC-Language G-Code
Firmware based on Smoothieware
Wear Parts
› Hotend (part of the print head, for heating filament)
› Print bed tape (foil on the print bed that provides adhesion for the print
object)