BIGREP ONE - Page 53

BigRep ONE 2 Safety
53
Safety Hazards
Electrical Hazards
Never attempt to bypass or deactivate fuses!
Keep moisture away from live parts!
In case of water damage disconnect the device from its power source!
Switch device o completely and disconnect from power source before conduct-
ing any work on the electrical system as well as before any maintenance and re-
pair work.
Any work on electrical components may only be carried out by qualified special-
ists. This applies especially for any work on components inside the control cabi-
net!
Chemical Hazards
Please be sure to always refer to the specifications provided by the manufacturer
or retailer for the individual types of filament material.
Make sure that the working environment is suiciently ventilated during the print-
ing process.
There is an immediate risk of fatal injury in case of contact with live parts.
In case of damage to the insulation, disconnect the device from the power
source immediately and arrange for a qualified specialist to carry out repair!
DANGER — HIGH ELECTRIC VOLTAGE
CAUTION
Unauthorized filaments can produce vapors with harmful health eects.
Never clean the print bed with solvent-based detergents. They may pro-
duce toxic fumes when heated.