Shenzhen Big Tree Technology Co., Ltd.
BIGTREETECH
25 / 30
Configure the Motherboard
SSH Connect to Device
1. Install the SSH application Mobaxterm: https://mobaxterm.mobatek.net/download-
home-edition.html
2. Insert MicroSD card to E3EZ, and wait for the system to load after power on, approx.
1-2min.
3. The device will automatically be assigned an IP address after successfully connecting
to the network.
4. Find the device IP address on your router page.
5. Or use the https://angryip.org/ tool, scan all IP addresses in the current network
organize by names, and find the IP named Fluidd, Mainsail (CM4), or BTT-CB1,
Hurakan (CB1), as shown below.
6. Open Mobaxterm and click "Session", and click "SSH", inset the device IP into
Remote host, and click "OK" (Note: your computer and the device needs to be under
the same network).
To Next Page
Loading...
Need help?
General
