Produced by BIGTREETECH
Page 6 of 25
7. Temperature sensor interfaces: TB, T0, T1, T2, T3 (With direct inputs available that
bypass the protection circuit for alternate use).
8. Display interfaces: BIGTREETECH TFT touch screen, LCD12864, LCD2004, etc.
9. PC communication interfaces: USB Type-C with configurable BAUD.
10. Expansion interfaces: Filament runout, power loss detection, automatic power down,
BL Touch and many others.
11. Supported print file format: G-code
12. Recommended slicing/interface software: Cura, IdeaMaker, Simplify3D, Prusa Slicer,
Pronterface, Repetier-host, Makerware, etc…
To Next Page
Loading...
