AB 01 01/2009 page 20/26
Guarantee / repair and maintenance tasks must only be performed by persons or workshops
that have been authorized by BINDER. Otherwise, BINDER will perform the tasks itself. If
you do not know whom to contact in the event of a fault, contact us and we will advise you of
the nearest authorized workshop
Never try to open the device in order to repair it. In case of problems please contact BINDER service:
BINDER telephone hotline: +49 (0) 7462 2005 555
BINDER fax hotline: +49 (0) 7462 2005 93555
BINDER e-mail hotline: service@binder-world.com
BINDER service hotline USA: +1 866 885 9794 or +1 631 224 4340 (toll-free in the USA)
BINDER service hotline Spain +34 9492 677 23
BINDER service hotline Asia Pacific: +852 39070500 or +852 39070503
BINDER service hotline Russia and CIS +7 495 98815 17
BINDER Internet website http://www.binder-world.com
BINDER address BINDER GmbH, post office box 102, D-78502 Tuttlingen
International customers, please contact your local BINDER distributor.
When calling us please provide following information:
• Unit type and serial number
• Date of purchase (see invoice / purchase slip)
• Kind of the fault / description of the defect
• Your full address and the installation location (building, department)
• Times at which we can contact you
9. Disposal
9.1 Disposal of the transport packing
Packing element Material Disposal
Transport box Cardboard Paper recycling
Foamed plastic stuffing PE foam Plastic recycling
Bag for operating manual PE foil Plastic recycling
Insulating air cushion foil PE foil Plastic recycling
If recycling is impossible, all packing parts can also be disposed of with normal waste.
9.2 Decommissioning
Switch off the unit at the main switch (1). Disconnect the unit from the power supply.
• Temporary decommissioning: See indications for appropriate storage, chap. 3.2.
•
Final decommissioning: Dispose of the unit as described in chap. 9.3 to 9.5.
To Next Page
Loading...