Binder BD 53 - GS Mark Conformity Certificate

69 pages

Save Page as PDF

To Next Page

To Previous Page

BD / ED / FD (E2) 03/2019 page 60/68

13.4 Certificate for the GS mark of conformity of the “Deutsche Gesetzliche

Unfallversicherung e.V.“ (German Social Accident Insurance) DGUV

Main Page

Table of Contents2
Safety4
Legal Considerations4
Structure of the Safety Instructions4
Signal Word Panel4
Safety Alert Symbol5
Pictograms5
Word Message Panel Structure6
Localization / Position of Safety Labels on the Chamber6
Type Plate7
General Safety Instructions on Installing and Operating the Chambers8
Intended Use10
Operating Instructions11
Measures to Prevent Accidents11
Chamber Description12
Chamber Overview13
Installation13
Unpacking, and Checking Equipment and Completeness of Delivery13
Guidelines for Safe Lifting and Transportation14
Storage14
Location of Installation and Ambient Conditions15
Installation of the Equipment16
Electrical Connection16
Connection to a Suction Plant (Optional)17
Start up17
Turning on the Chamber17
Heating Operation Display17
Air Change18
Operating the Controller18
Display / Entry of Temperature Set-Point (Without Ramp Function)18
Display / Entry of Temperature Set-Point (with Selected Temperature Ramp)19
Time Functions: Continuous Operation and Timer Operation20
Switching between "Continuous Operation" and "Timer Operation21
Continuous Operation21
Timer Operation: Setting the Tempering Time22
User Level Settings23
Temperature Unit Change between Degrees Celsius °C and Degrees Fahrenheit °F23
Entering a Temperature Ramp24
Chamber Addressing24
General Notes25
Temperature Safety Devices26
Temperature Safety Device Class 2 (DIN 12880) ED, FD26
Temperature Safety Device Class 3.1 (DIN 12880) BD (Option for ED, FD)27
Options29
Disconnectable Audible Over-Temperature Alarm (Option)29
APT-COM™ 4 Multi Management Software (Option for BD and ED)29
Data Logger Kit (Option)29
Additional Pt100 Temperature Sensor (Option for BD)30
Analog Output for Temperature (Option)30
Water Protected Internal Socket (Option for BD)31
Maintenance, Cleaning, and Service32
Maintenance Intervals, Service32
Cleaning and Decontamination32
Cleaning33
Decontamination34
Sending the Chamber Back to BINDER Gmbh35
Disposal36
Disposal of the Transport Packing36
Decommissioning36
Disposal of the Chamber in the Federal Republic of Germany36
Disposal of the Chamber in the Member States of the EU Except for the Federal Republic of Germany37
Disposal of the Chamber in Non-Member States of the EU38
Troubleshooting39
Technical Description40
Factory Calibration and Adjustment40
Definition of Usable Volume40
Over Current Protection40
BD Technical Data41
ED Technical Data42
FD Technical Data44
Equipment and Options BD (Extract)47
Equipment and Options ED (Extract)48
Equipment and Options FD (Extract)49
Accessories and Spare Parts (Extract)50
Certificates and Declarations of Conformity51
EU Declaration of Conformity for BD51
EU Declaration of Conformity for ED54
EU Declaration of Conformity for FD57
Certificate for the GS Mark of Conformity of the "Deutsche Gesetzliche Unfallversicherung E.V." (German Social Accident Insurance) DGUV60
Product Registration62
Contamination Clearance Certificate63
For Chambers Located Outside the USA and Canada63
For Chambers Located in the USA and Canada66

Binder BD 53 - GS Mark Conformity Certificate

Table of Contents

Related product manuals