To Next PageTo Next PageWhy have programs been deleted from my Binder Laboratory Equipment?
If programs have been deleted, ensure that the programs are no more needed when changing from 2 programs to 1 program or vice-versa.
Why does the Binder Laboratory Equipment controller return to Normal Display from any level?
If the controller returns to Normal Display from any level, repeat entries and enter the values rapidly. This happens when no button was hit for more than 120 seconds.
Instructions for unpacking, safe lifting, transport, and storage of the chamber.
Requirements for chamber placement, ventilation, and ambient operating conditions.
Adjusting air change and initial settings for the RD3 program controller.
Details on the function and operation of temperature safety devices.
Procedures for cleaning and decontaminating the chamber after use.
Troubleshooting guide for heating system and controller malfunctions.
General| Temperature Range | 5 °C above ambient temperature to 300 °C |
|---|---|
| Temperature Fluctuation | ±0.1 °C |
| Permitted load per shelf | 30 kg |
| Internal Dimensions (W x H x D) | 600 x 480 x 400 mm |
| Power Supply | 230 V, 50/60 Hz |
| Type | Forced convection oven |
| Interior Volume | 115 liters |
| Number of shelves standard/max | 2/ |
