Redline Operating Manual RE / RF / RI 12/2010 page 14/46
1.4 Type plate
The type plate is located on the left-hand side of the unit, bottom right-hand.
Figure 2: Type plate (example: RE 53)
Indications of the type plate Information
Nominal temperature 220 °C
428°F
Nominal temperature
Enclosure protection IP 20 IP type of protection 20 acc. to EN 60529
Art. No. 9090-0001 Article number 9090-0001
0,80 kW Nominal power 0.80 kW
230 V 1 N ~
Nominal voltage 230 V ± 10%, single-phase unit
3,5 A Nominal current 3.5 Amp
50/60 Hz Power frequency 50/60 Hz
RE 53 Model RE 53
Serial No. RE-000000-00000 Serial No. RE-000000-00000
Symbol on the type plate Information
CE conformity marking
Electrical and electronic equipment manufactured / placed on
the market in the EC after 13 August 2005 and to be disposed
of in a separate collection according to directive 2002/96/EC
on waste electrical and electronic equipment (WEEE).
LABORATORY EQUIPMENT
43KM
(UL units only)
The equipment is certified by Underwriters Laboratories Inc.
®
according to standards CAN/CSA-C22.2 No. 61010-1, 2
nd
Edition, 2004-07 (Electrical Equipment for Measurement,
Control, and Laboratory Use; Part 1: General Requirements);
UL 61010-1, 2
nd
Edition, 2005-07-22 (Electrical Equipment for
Measurement, Control, and Laboratory Use; Part 1: General
Requirements); IEC 61010-1:2001, 2
nd
Edition and IEC 61010-
2-10 (Particular Requirements for Laboratory Equipment for
the heating of materials).
Nominal temperature 220 °C 0,80
kW
428°F 230
V 1 N ~
Enclosure protection
Art. No.
IP 20
9090-0001
3,5
50/60
A
Hz
RE 53 Serial No. RE-000000-00000
www.binder-redline.com
Made by BINDER in Germany
To Next Page
Loading...
