BIOCORP Mallya - Page 32

Page 28 / 41 IFU_MAL_EN_V6
The following screen is displayed with 2 options to choose from:
YES, this device is exclusively used with
the same type of pen (same as the original
pen).
NO, I have placed this device on another
type of pen.
In this case, the injection dose will be
displayed in the injection history as if no
mounting event had taken place.
1) In this case, the screens in sections
5.4.2.3., 5.4.2.4., and 5.4.2.5. are
displayed. You have to select the new pen
model on which your Mallya is currently
assembled.
The new pen model currently assembled
is then displayed at the top of the screen
(Apidra in the example below):
2)
Following your change of pen model,
some new injections (or primings) are
pending confirmation of the insulin type
that has been used.
Those injections are displayed in the list
above with a grey colored circle and the
“insulin undetermined” text:
Example
with the
“LANTUS”
pen model
(Pen
unchanged)
Example
with a new
“APIDRA”
pen model
selected
(pen model
currently
assembled
to Mallya)