To Next PageTo Next PageHow to troubleshoot a Bionics BFM-900L that is not powered?
If your Bionics Monitor isn't powering on, check the following: - Ensure the AC power cord is properly plugged in. - Check for any issues with the switch connection.
What to do if my Bionics Monitor displays “PAPER OUT!”?
If your Bionics Monitor shows a “PAPER OUT!” message: - Open the print door and ensure the paper is correctly inserted. - If the monitor is out of paper, install more printing paper.
Why is nothing shown on the HR measured value display of my Bionics BFM-900L?
If the HR measured value display on your Bionics Monitor is blank, check the following: - Confirm that the connection between the device and the Probe Connection Terminal is secure. - Ensure that you are using the probe provided by our company. - Verify that the FHR II measurement setting is correctly configured.
Provides an overview of the fetal monitor's purpose and general information.
Explains the device's function and the manual's organizational structure.
Lists all chapters and sections for manual navigation.
Defines warning, caution, and note symbols used in the manual.
Details environmental conditions to avoid when using or storing the device.
Outlines essential safety measures related to electrical connections and grounding.
Provides guidelines for cleaning and maintaining the device to prevent damage.
Describes the core function, measurement principles, and key features of the BFM-900L.
Lists the basic accessories and optional components included with the device.
Identifies and labels the physical parts of the device's front and left faces.
Explains the meaning of various symbols used on the device and in the manual.
Lists safety and environmental precautions before installing the BFM-900L.
Guides on how to place and position the main unit of the BFM-900L.
Details the procedures for connecting power, probes, and other cables.
Instructions on how to load the printing paper into the device.
Pre-operation checks for safety, power, and accessories.
Outlines the basic steps for connecting probes and starting measurements.
Explains the elements and displays on the device's main screen.
Describes the purpose and operation of each key on the device.
Step-by-step guide on how to measure Fetal Heart Rate using the Doppler probe.
Instructions on how to measure Uterine Contraction using the UC probe.
Explains how to use the event mark function to record fetal movements.
Details how to operate the printer, including starting and stopping recording.
Explains how to control the printing speed of the device.
Guides on adjusting the print contrast for better readability.
Describes the setting for recording Fetal Movement (FM) on the printout.
Instructions on adjusting volume levels through the device's menu system.
Explains how to adjust volume directly using dedicated keys.
Details how to manage the alarm functions, including silencing and turning them off.
Explains the different types of sounds the device produces (Doppler, Alarm, Information).
Describes the function and usage of the optional AST probe for waking the baby.
Covers settings related to the printer, such as Auto Print, Offset, Zoom, and Speed.
Details how to configure high and low alarm limits for FHR.
Explains how to set the volume levels for Doppler 1 and Doppler 2.
Guides on setting the device's current date and time.
Describes how to reset all parameters to their factory default values.
Lists common error codes and their corresponding descriptions.
Explains the causes and behaviors of alarm sounds and visual indicators.
Describes the meaning of informational sounds and messages displayed by the device.
Explains how the device operates using AC power and the indicator light.
Details the operation, charging, and limitations of the optional battery.
Provides troubleshooting steps for issues related to the device not powering on or working normally.
Offers solutions for problems encountered during FHR and UC measurements.
Addresses issues related to the printer, such as paper out errors.
Lists the physical dimensions and weight of the BFM-900L unit.
Details the operating and storage temperature, humidity, and pressure ranges.
Specifies the power requirements, protection, and battery details.
Covers performance aspects like Doppler type, frequency, FHR range, and accuracy.
General