Biostar NM70I-1007U - Enhanced Intel Speedstep Technology; Graphics Core Ratio Limit

NM70I-847/NM70I-807/NM70I-1007U/NM70I-1037U UEFI BIOS Manual
30
CPU Spread Spectrum
This item sets CPU Clock Spread Spectrum.
Options: Enabled (Default) / Disabled
CPU C1E
C1E is “Enhanced Halt State” function, this function helps to save power and
decrease heat by lowering CPU frequency while the processor is not
working.
Options: Enabled (Default) / Disabled
Enhanced Intel SpeedStep Technology
This item enables/disables Enhanced Intel SpeedStep Technology.
Options: Enabled (Default) / Disabled
CPU Core Current Max (Amp)
This item sets the Max instantaneous current allowed at any given time.
Options: 75 (Default)
iGFX Core Current Max (Amp)
This item sets iGFX core current MAX
Options: 35 (Default)
Graphics Core Ratio Limit
This item sets Graphics Core Ratio Limit.
Options: 16 (Default)
DDR3 DRAM Timing Control
This item allows you to choose to manually or automatically regulate the
DRAM Timing.
Options: By SPD (Default) / Manual
DDR3 DRAM Multiplier
This item allows you to set DDR3 DRAM Multiplier.
Options: 13.33(Default) / 10.67 / 16.00
Note: The options and default settings might be different by CPU models.