Biostar TPower I45 User Manual

Motherboard Manual
40
Auto-Control
OFF
Increase Speed
Decrease Speed
Click the auto-control off and then the adjust level will show; use the level to
increase/decrease the fan speed. Be aware if the fan level been down to 0%,
the fan will still not completely stop; this is for your system’s protection.
<Fan Control Settings>
Click to enter the fan control
setting dialog. Here you can set CPU
temperature to control the fan; including
target CPU temperature, CPU
temperature for full fan speed, and CPU
temperature for shutdown system.
Besides, you can also see system
information in this dialog.

Biostar TPower I45 Specifications

General

Number of memory slots	4
Maximum internal memory	16 GB
Processor socket	LGA 775 (Socket T)
Processor manufacturer	Intel
Compatible processor series	Intel Celeron Dual-Core, Intel Pentium Dual-Core
USB 2.0 connectors	3
S/PDIF out connector	Yes
Number of SATA connectors	6
PS/2 ports quantity	2
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Parallel ports quantity	-
Ethernet LAN (RJ-45) ports	1
Firewire (IEEE 1394) ports	0
Audio chip	Realtek ALC888S
Motherboard form factor	ATX
Compatible operating systems	Windows 2000/XP/Vista
RAID levels	0, 1, 5, 10
LAN controller	Realtek RTL8111C
Networking features	Gigabit Ethernet