EasyManuals Logo

Biostar TPower I45 User Manual

Biostar TPower I45
71 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
TPower I45
1
CHAPTER 1: INTRODUCTION
1.1 B
EFORE YOU START
Thank you for choosing our product. Before you start installing the
motherboard, please make sure you follow the instructions below:
Prepare a dry and stable working environment with
sufficient lighting.
Always disconnect the computer from power outlet
before operation.
Before you take the motherboard out from anti-static
bag, ground yourself properly by touching any safely
grounded appliance, or use grounded wrist strap to
remove the static charge.
Avoid touching the components on motherboard or the
rear side of the board unless necessary. Hold the board
on the edge, do not try to bend or flex the board.
Do not leave any unfastened small parts inside the
case after installation. Loose parts will cause short
circuits which may damage the equipment.
Keep the computer from dangerous area, such as heat
source, humid air and water.
1.2 PACKAGE CHECKLIST
HDD Cable X 1
Serial ATA Cable X 6
Serial ATA Power Cable X 6
Rear I/O Panel for ATX Case X 1
User’s Manual X 1
Fully Setup Driver CD X 1
FDD Cable X 1 (optional)
USB 2.0 Cable X1 (optional)
S/PDIF out Cable X 1 (optional)
Note: The package contents may differ by area or your motherboard version.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Biostar TPower I45 and is the answer not in the manual?

Biostar TPower I45 Specifications

General IconGeneral
Number of memory slots4
Maximum internal memory16 GB
Processor socketLGA 775 (Socket T)
Processor manufacturerIntel
Compatible processor seriesIntel Celeron Dual-Core, Intel Pentium Dual-Core
USB 2.0 connectors3
S/PDIF out connectorYes
Number of SATA connectors6
PS/2 ports quantity2
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Parallel ports quantity-
Ethernet LAN (RJ-45) ports1
Firewire (IEEE 1394) ports0
Audio chipRealtek ALC888S
Motherboard form factorATX
Compatible operating systemsWindows 2000/XP/Vista
RAID levels0, 1, 5, 10
LAN controllerRealtek RTL8111C
Networking featuresGigabit Ethernet

Related product manuals