EasyManuals Logo

Biostar TPower I45 User Manual

Biostar TPower I45
71 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #46 background imageLoading...
Page #46 background image
Motherboard Manual
44
<Update BIOS>
Before doing this, please download the proper BIOS file from our website:
www.biostar.com.tw
Update BIOS procedure should be run with
Clear CMOS (or Restart) function, so please
check on Clear CMOS (or Restart) first.
(Restart Your System)
Then click Update BIOS button, a
dialog will show for asking you backup
current BIOS. Click Yes for BIOS
backup and refer to the Backup BIOS
procedure; or click No to skip this
procedure.
After the BIOS Backup procedure, the
open dialog will show for requesting the
BIOS file which is going to be updated.
Please choose the proper BIOS file for
updating, then click on Open.
The utility will update BIOS with the
proper BIOS file.
After the BIOS Update process, click on
OK to restart the system.
While the system boots up and the full screen logo shows, press <Delete>
key to enter BIOS setup.
In the BIOS setup, choose Load Optimized Defaults and press
<Enter>Æ<Y>Æ<Enter>. After that use Save and Exit Setup to exit BIOS setup.
BIOS Update is completed.
All the information and content above about the T-Power 2 utility are subject to be
changed without notice. For better performance, the utility is being continuously
updated. The information and pictures described above are for your reference only.
The actual information and settings on board may be slightly different from this
manual.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Biostar TPower I45 and is the answer not in the manual?

Biostar TPower I45 Specifications

General IconGeneral
Number of memory slots4
Maximum internal memory16 GB
Processor socketLGA 775 (Socket T)
Processor manufacturerIntel
Compatible processor seriesIntel Celeron Dual-Core, Intel Pentium Dual-Core
USB 2.0 connectors3
S/PDIF out connectorYes
Number of SATA connectors6
PS/2 ports quantity2
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Parallel ports quantity-
Ethernet LAN (RJ-45) ports1
Firewire (IEEE 1394) ports0
Audio chipRealtek ALC888S
Motherboard form factorATX
Compatible operating systemsWindows 2000/XP/Vista
RAID levels0, 1, 5, 10
LAN controllerRealtek RTL8111C
Networking featuresGigabit Ethernet

Related product manuals