Need help?Do you have a question about the BIRD 4410A and is the answer not in the manual?
General| Brand | BIRD |
|---|---|
| Model | 4410A |
| Category | Measuring Instruments |
| Language | English |
General safety precaution regarding high voltage supply and component replacement.
Precaution against removing RF transmission line while RF power is present.
Precaution against servicing/adjusting equipment alone.
Requirement for uninterruptible earth safety ground for test instruments.
Personnel working with high voltages should know resuscitation methods.
Precaution to remove power before opening the instrument.
Warning about RF radiation, shock, and burns; turn off transmitter.
Warning about RF voltage presence in the element socket during operation.
Procedure for inserting the wattmeter into coaxial transmission lines.
Explains how to make forward and reflected power measurements using plug-in elements.
How to determine VSWR using the provided graphs with forward and reflected power readings.
Table outlining common problems, their causes, and recommended remedies.
Procedure for complete calibration of the Series 4410 Wattmeter assembly.
Lists the necessary equipment and recommended models for calibration.
Specifies the required environmental conditions for accurate calibration.
Step-by-step guide for performing the calibration of the wattmeter.
To Next Page
