Enter the address of your desired pool.
The S21 Pro server can be set up with three mining
pools, with decreasing priority from the first pool (pool 1) to
the third pool (pool 3). The pools with low priority will only
be used if all higher priority pools are offline.
Your worker ID on the selected pool.
The password for your selected worker.
3. Click Save after the configuration.
2.3 Monitor your Server
To check the operating status of your server:
1. Click dashboard marked below to check the server status (taking S21 Pro 245T as
an example).
2. Monitor your server according to the descriptions in the following table:
Number of chips detected in the chain.
To Next Page
Loading...
