BITMAIN AntMiner S21 Pro - Setting up the Server

S21 Pro User Guide
5
2 Setting up the Server
NOTE:
 The file IPReporter.zip is supported by Microsoft Windows only.
2.1 Setting up the Server
To set up the server:
1. Go to the following site:
https://file12.bitmain.com/shop-product/firmware/IP%20Reporter.zip.
If the link is invalid, please visit the official firmware download page
(https://service.bitmain.com/support/download) and select as shown in the image to
download IPReporter.zip.
2. Download the following file: IPReporter.zip.
3. Extract the file.
NOTE:
 The default DHCP network protocol distributes IP addresses automatically
4. Right-click IPReporter.exe and run it as Administrator.
5. Select one of the following options:
■ Shelf, Step, Position – suitable for farm servers to mark the location of the servers.
■ Default – suitable for home servers.
6. Click Start.