2. For Keep Settings:
(1) Select “keep settings” to keep your current settings (default).
(2) Unselect “keep settings” to reset the server to default settings.
3. Click the button and navigate to the upgrade file. Select the upgrade file,
then click Update.
4. When the upgrade is completed, restart the server. It will return to the settings page.
5. Click one of the following options:
■ Reboot - to restart the server with the new firmware.
■ Go Back - to continue mining with the current firmware. The server will load the
new firmware next time it is restarted.
3.3 Modifying your Password
To change your login password:
1. In System, click the Password tab.
2. Set your new password, then click Save.
To Next Page
Loading...
