EasyManua.ls Logo

BITMAIN AntSpace HK3 - 2 Safety Description; General Safety Instructions; All Safety Instructions

Default Icon
89 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ANTSPACE HK3 Water cooling container & Dry-Wet Tower Product Manual
3
2 Safety Description
2.1 General Safety Instructions
DISCLAIMER: The equipment company is not responsible for any of the following situations.
Operation beyond the conditions specified in this document.
Usage under installation and operating environments which are not specified in related
international specifications.
Failure to follow the operation instructions and safety precautions on the product and in the
document.
Damage caused by abnormal natural environments.
2.2 All Safety Instructions
To ensure safety of humans and the equipment, pay attention to the safety symbols on the
equipment and all the safety instructions in this document.
The "NOTICE", "CAUTION", "WARNING" and "DANGER" marks in this document do not
represent all the safety instructions. They are only supplements to the safety instructions.
Local Safety Regulations
When operating the equipment, you must follow the local laws and regulations. The safety
instructions in this document are only supplements to the local laws and regulations.
Personal Requirements
Only trained and qualified personnel are allowed to install, operate, and maintain Bitmain
equipment, and they must understand basic safety precautions to avoid hazards.
Only trained and qualified personnel are allowed to install, operate, and maintain Bitmain
equipment.
Only personnel certified or authorized by equipment provider are allowed to replace or change
the equipment or components (including software).
Any fault or error that might cause safety problems must be reported immediately to a supervisor.
Grounding Requirements
Equipment to be grounded must meet the following requirements:
When installing the device, always make the ground connection first and disconnect it at the end.
Do not damage the ground conductor.
Do not operate the equipment in the absence of a properly installed ground conductor.
Ensure that the equipment is connected permanently to the protective ground.
Personal Safety

Related product manuals