ANTSPACE HK3 Water cooling container & Dry-Wet Tower Product Manual
6
2.5 Operation Safety
High Temperature and Pressure
Misoperations may cause over high pressure, which may result in eruption of coolant.
Pay attention to high-pressure parts: exhaust valves and drain valves.
High Speed Running
Pay attention to high-speed running part: fan.
2.6 Others
Binding Signal Cables
Laying Out Power Cables
When the temperature is very low, violent strike or vibration may damage the power cable
sheathing. To ensure safety, comply with the following requirements:
Power cables can be laid or installed only when the temperature is higher than 0°C.
Before laying out power cables which have been stored in a temperature lower than 0°C, move
the power cables to an environment of the ambient temperature and store them at the ambient
temperature for at least 24 hours.
Handle power cables with caution, especially at a low temperature. Do not drop the power cables
directly from the vehicle.
Storage
Do not store devices near a heat source or under direct sunshine.
To Next Page
Loading...