ANTSPACE HK3 Water cooling container & Dry-Wet Tower Product Manual
10
cooling Water with reduced water temperature enters the system again through the pump unit for heat
dissipation.
Dry Tower
Similar to the dry wet tower, the dry tower uses a power fan to force air convection to achieve
heat exchange between the air and the internal circulating medium, thereby achieving overall heat
dissipation.
Plate Heat Exchanger
During the operation of a plate heat exchanger, a thin rectangular fluid channel is formed
between each heat exchange plate. The cold and hot heat exchange media enter these narrow and
tortuous flow channels through the holes at the four corners of the plate. The ripples on the plate
enhance the stiffness of the plate and also enhance the turbulence of the fluid. Two types of media
form a parallel flow or a reverse flow between the plates, and heat exchange is carried out through
the intermediate layer plates to achieve the purpose of use.
Figure 3-1 Dry Wet Tower Schematic diagram of container Water cooling system
To Next Page
Loading...