6. Cleaning Head
Printing quality might be degraded by dust, foreign substance, adhesive substance, or
other pollution materials stuck in the printer head or inside the printer.
When dirty, clean the print head as follows:
- Make sure to turn the printer power off prior to cleaning.
- As the print head gets very hot during printing, if intending to clean
the print head, turn the printer power off and wait approximately 2~3
minute before commencement.
- When cleaning the print head, take care not to touch the heated
portion of the print head.
→ Printer Head is susceptible to damage from static electricity,
etc.
- Take care not to allow the print head to become scratched and/or
damaged in any way.
V10 CONSUMIBLES S.L.
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
To Next Page
Loading...
