BIXOLON SLP-TX403 - Cleaning the Print Head

6-1 Cleaning Head
1) Open the paper cover and clean the printhead using the cloth or cotton swab soaked in
alcohol for medical.
2) After cleaning the head, do not use the printer until the alcohol used for cleaning
evaporates completely (1~2 min) and the printer has completely dried.
※ Perform the cleaning process each time the paper roll is replaced to prevent print
quality deterioration.
V10 CONSUMIBLES S.L.
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309