Check / set the status of the wireless interface
1) Bluetooth
- Check Bluetooth Device name
- SSP (Secure Simple Pairing) / PIN code mode setting
- Check MAC address
- BLE / Classic mode setting
- Bluetooth On / Off setting
2) Wireless LAN
- Check SSID setting and encryption
- Check MAC address and IP address
- Check operation mode and port
- Wireless LAN On / Off setting
- Reset settings
- Simple connection
(easy connection to AP by linking with simple connection APP)
Media settings
1) Select paper type and sensor
- Label paper (Auto detection / Rear black mark / Gap)
- Receipt paper
- Linerless paper
2) Adjust the print density
3) Adjust the cutting position
4) Filler setting and filler sensor sensitivity adjustment
Check firmware information and setting
1) Check printer and wireless interface firmware information
2) Print the setting information
3) Check the battery status
Set Backlight, Sleep and Auto Power Off Time
1) Backlight On / Off
2) Backlight Auto Off time setting
3) Power save and Power off function On / Off
4) Power save and power off time setting
To Next Page
Loading...
