BIXOLON SRP-350plusV - Page 32

Network Connection Manual
Ver.1.00
- 32 -
If the above message is printed, select Mode 2 / 4, and you will see the following WLAN
information.
- To select Mode 2, press the Feed button twice quickly / once long.
- To select Mode 4, press the Feed button four times quickly / once long.
LAN(WLAN) Factory Reset OK! Reboot Printer.
After the above message is printed, the printer will automatically reboot.
Factory Reset Values
LAN Network
Inactivity time
0
IP Assignment
Method
Automatic(DHCP)
Local Port
9100
WLAN
System
Printer Name
*Printer model
Printer Port Num
9100
User ID
admin
User Password
password
Enc / Auth
Encryption
None/Open
Network
Network Mode
Soft AP mode
SSID
PRINTER_{MAC address}
Inactivity time
10
IP Assignment
Method
Manual (DHCP server)
IP, Subnet,
Gateway
IP : 192.168.1.1
Subnet : 255.255.255.0
Gateway : 192.168.1.2