BIXOLON SRP-350plusV - Connecting Printer via USB and WLAN

Network Connection Manual
Ver.1.00
- 7 -
4-1 Connecting Printer
1) USB cable
Connect USB cable to Printer, PC device.
Use the “Net Configuration Tool” to adjust the settings.
2) WLAN
Connect to the AP (Access Point) configured in Infrastructure mode in order to connect
to the LAN/wireless network
Infrastructure mode
In order to configure the network between the wireless host device and the printer,
set the printer to Soft AP Mode.
Soft AP mode
* Soft AP mode is only supported on IFJ-WD.
A P