Operating instructions iS10 / iS20 Operation
38019417000 en 41
5
This equals 200 x the internal fine division. An internal division step is the 120,000th part
of the weighing range.
Example
Weighing Range: 30 kg
Interval: 10 g
Fine division: 0.25 g
Lower limit of reference weight mass: 50 g
Weighing range
scale interval
subject to met-
rological ap-
proval
1d (internal) 200d Minimum reference weight at...
[kg]
Display interval
[g]
max.
120 000d [g]
min. reference
mass [g]
1)
Reference
number 10 [g]
Reference
number 20 [g]
≤ 10.00 ≤ 2 – ≤ 18 – –
≤ 15.00 ≤ 5 ≤ 0.125 ≤ 25 ≤ 2.5 ≤ 1.25
≤ 30.00 ≤ 10 ≤ 0.25 ≤ 50 ≤ 5 ≤ 2.5
≤ 40.00 ≤ 10 ≤ 0.33 ≤ 66.6 ≤ 6.67 ≤ 3.33
≤ 60.00 ≤ 20 ≤ 0.5 ≤ 100 ≤ 10.0 ≤ 5.0
≤ 120.00 ≤ 20 ≤ 1.0 ≤ 200 ≤ 20.0 ≤ 10.0
≤ 150.00 ≤ 50 ≤ 1.25 ≤ 250 ≤ 25.0 ≤ 12.5
≤ 300.00 ≤ 100 ≤ 2.5 ≤ 500 ≤ 50 ≤ 25
1)
The minimum reference mass must be placed on the scale, otherwise there is no calculation of
number of pieces.
Start counting process
Key Display presentation Process description
Reference number is loaded.
Selection of reference number with
or
Confirm reference number with
To Next Page
Loading...
Need help?
General
