Operation Operating instructions iS10 / iS20
42 38019417000 en
5
Key Display presentation Process description
Calculation of reference weight with preselected
reference number.
Number of pieces = reference number
Continuous display of number of pieces accord-
ing to load of scale.
Cancel counting process
Key Display presentation Process description
Return to weighing mode w/o deleting of refer-
ence weight.
End counting process
Key Display presentation Process description
Return to weighing mode with deleting of refer-
ence weight.
5.12.6 Weight display with increased resolution (not metrologically
approved)
Key <F1> is assigned with "FEin", see page 25.
Key Display presentation Process description
Call up weight display with increased
resolution.
The weight display is performed with
10 times higher resolution.
After pressing key <F1> or after expira-
tion of the control time of 5 s return to
normal weight display (only in ap-
proved operation).
In operating mode "weight display with increased resolution" the record-
ing functions are blocked.
To Next Page
Loading...
Need help?
General
