BK Precision 9104 User Programming Manual

2. Command Set
In order to use remote commands, please make sure to use the following communication
settings:
1. Baud rate: 9600
2. Data bits: 8
3. Parity: none
4. Stop bits: 1
If you are using HyperTerminal, make sure to check your ASCII setup to not append line feeds.
Command line format: COMMAND<parameter1><parameter2>…[CR]
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com

BK Precision 9104 Specifications

General

Brand	BK Precision
Model	9104
Category	Power Supply
Language	English