BKT Elektronik BPS2000v2 - View of the Control Module, Including a Descrip on of the Connectors

6
Operang Instrucons - BPS2000v2 Monitoring Power Distribuon Unit
6.1. View of the control module with descripƟon of the connectors
x DescripƟon of connectors, controls and LED lights
1. Led lights:
R
RUN
: operang status of the control module
indicates correct status of the device - flashing green LED (1:1)
k
kWh
: energy count pulse signaling
A
ALM
: alarm status
Normal state - LED off
Fault - LED blinking red (1:1)
2. Menu - main menu of control module
3. Up - moves to the next LCD screen
4. Down - returns to the previous LCD screen
5. Reset - control module restart
6. T/H - port for connecng temperature/humidity sensor
7. NET(RJ45) - Network port
Descripon of LED lights:
yellow/status - ON: port is connected, OFF: port is disconnected, blinking: data is transmied
green/rate - ON: 100Mbps, OFF: 10Mbps
8. SB - Sensor Box environmental condions module connecon port
9. OUT - serial communicaon output port RS485 (Modbus RTU/SNMP)
10. IN - serial communicaon input port RS485 (Modbus RTU/SNMP)
11. LCD screen