BKT Elektronik BPS2000v2 - LCD Display Interface for 250 V Single Phase Version

7
Operang Instrucons - BPS2000v2 Monitoring Power Distribuon Unit
6
6.2 LCD display interface for 250V single phase version
Screen 1
Read: Phase(L1) / Load(0.0A) / Voltage(237.6V) / Acve power (0.0kW) / Energy(0.0kWh)
Screen 2
Read: Phase(L1) / Load(0.0A) / Voltage(237.6V) /Acve power (0.0kW)/Power factor (0.00)
Screen 3
Read: the IP address of the BPS2000
Screen 4
Read/Write*: Master/Slave configuraon for SNMP or ModBus RTU
Address: 00 indicates that the unit is in master mode
Address: 01 ÷04 indicates that the unit is working in Slave mode from 1 to 4
Screen 5
Read/Write*: Seng of threshold values, maximum for the following parameters
Load(32A)/ Voltage(250.0V)/ Temperature(44°C)/ Humidity(99%).
32A
L1
250 V
44 °C 99 %
1
Add
192
168 000
163
Press UP Press
UP
Screen 1 Screen 2
Screen 5
Press
UP
Press
UP
Screen 3
Screen 4
L1 0.00A
237.6V 0.0kW
000012.5kWh
L1 0.00A
237.6V 0.0kW
PF-0.00