Black Box ServSwitch KV0004A User Manual

Chapter 3: Installation
724-746-5500 | blackbox.com
Page 11
3. Installation
3.1 Locations
Please consider the following important points when planning the position of the ServSwitch Freedom unit:
• SituatetheServSwitchFreedomunitclosetothesystemstowhichitwillbeconnectedandneartoapoweroutlet.
• Thankstotheoptionalremotecontrol,theServSwitchFreedomunitcanbesituatedoutofsightwithinthecablingcradleofa
desk or placed adjacent to the connected systems.
• ConsulttheprecautionslistedwithintheSafetyinformationsection.
3.2 Mounting
Before you begin connecting to the keyboard, mouse and source systems, it is advisable to mount the ServSwitch Freedom unit in
place, either:
• Onahorizontalsurfaceusingthesuppliedselfadhesivefeet,or
• Amongthecablingattherearofthedesk.
NOTE: Both the ServSwitch Freedom unit and its power supply generate heat when in operation and will become warm to the
touch. Do not enclose them or place them in locations where air cannot circulate to cool the equipment. Do not operate the
equipment in ambient temperatures exceeding 104° F (40° C). Do not place the products in contact with equipment whose sur-
face temperature exceeds 104° F (40° C).

Black Box ServSwitch KV0004A Specifications

General

Brand	Black Box
Model	ServSwitch KV0004A
Category	Switch
Language	English